McLannahan
|
| posted on 3/3/10 at 01:50 PM |
|
|
Cheap worktop?
I'm looking to buy 33 metres of worktop - as cheaply as I can!
Ideally 750mm deep and not 600 and as longer length as possible. Not so bothered by look although beech effect would be great - but I thjink out of my
shoddy budget!
Does anyone have any recommendations or contacts?
Thanks all
Michael
|
|
|
|
|
fesycresy
|
| posted on 3/3/10 at 02:01 PM |
|
|
Do you have a 'No Frills' near you?
I seem to remember picking up 2 for about £15 each last year?
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
se7en
|
| posted on 3/3/10 at 02:16 PM |
|
|
Does it have to be in good condition? if not go to a kitchen manufacturer and ask for damaged lengths; they usually sell them of cheaply.
|
|
|
McLannahan
|
| posted on 3/3/10 at 03:17 PM |
|
|
Thanks chaps - Can't seem to find anything about No Frills? Is it a Welsh shop?
Good idea about the kitchen manufacturer though - condition is not vital.
|
|
|
thunderace
|
| posted on 3/3/10 at 04:11 PM |
|
|
very easy 9mm wbp ply and facs it with 38mm x10mm then tile it.
|
|
|
ashg
|
| posted on 3/3/10 at 07:31 PM |
|
|
my other half works for a kitchen company they usually throw loads out because its got the slightest little nick or scuff. only problem is that were
a bit far apart
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
.jpg){kind=avatar}
