mangogrooveworkshop
|
| posted on 2/5/04 at 09:17 PM |
|
|
tig welding from oxycetelene
Saw an article on this welder. Any one got or seen this.
Henrob 2000 Welding and Cutting Torch
http://www.cut-like-plasma.com/
See poormans tig http://locost7.info/mirror/tools.php
[Edited on 2-5-04 by mangogrooveworkshop]
|
|
|
|
|
Mark Allanson
|
| posted on 2/5/04 at 09:48 PM |
|
|
Sounds like a standard sexy ahotaline torch with a No 1 nozzle fitted
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Peteff
|
| posted on 2/5/04 at 10:55 PM |
|
|
Read this review:-
http://www.tinmantech.com/html/faq__torch__henrob.html
He doesn't sound too impressed and recommends the Meco Midget at $100 instead. Plus you need Oxy and Acetylene cylinders to go with it which
makes it very expensive.
[Edited on 2/5/04 by Peteff]
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
mangogrooveworkshop
|
| posted on 3/5/04 at 07:57 AM |
|
|
Yep pretty much agree that the oxy and the ace bottles make it very expensive unless your place of employment uses such gear. Still looks good but as
the man says in FAQ the other thing is cheaper.
I think the original price may be AUS$
|
|
|
