I'm having my GSXR TB Zetec Manifold re-made so that it angles up rather than 90 deg out of the head. Anyone know what the port angle in the head is ? I guess it is 20 deg ....

Sorry I cant answer your question but please post a pic of the finished manifold when done.

cheers

Will do....A friend who runs a engineering company is going to make them. Once we have them right he'll be producing a batch of them. Looking to do something with the fuel rail as well.

About 18 degrees just measured on a blacktop 2litre.

re fuel rail, the black top zetec uses end fed injectors.

what gixer tb's are they ? I have some nice early 750's and need a manifold.

Cool, thanks for that info. I'll get him to cut the seats at 18 deg for the tubing to sit on before welding.

My TBs are GSXR-1000 but the diameter of the tubing out of the manifold plate can be adjusted to suit other TBs.

My TBs have be re-spaced but the fuel rail doesn't look right. Liam is going to re-make the fuel rail with an entry and exit at each end rather than what is there at the moment.

I'm looking for a manifold for my gsxr 1000s too. Any pics would be appreciated. You may have another customer :-). Would be interested in the fuel rail too.

Cheers

Bob

As soon as Liam gets back to work I'll hassle him to get it done

All I can say for those that don't want to facbricate is "ST170"



[Edited on 3/1/09 by scutter]

True...but this is going to be machined ally not plastic

Mmmmm, shiney