Folks, I've just recieved a set of seals for my type 9 gearbox, it developed a leak from the outshaft seal.
Just wondering if any one know where the other 2 seals go? the red seal is the output shaft.



ATB Dan.

I'm guessing, but I suspect the bigger of the two black ones is for the input shaft. The small one would then be for the speedo output?

I'll have a quick look in the manual....


Not very clear in the manual. I'm pretty sure that's what they are though. I can't think where else they might be from?

[Edited on 3/1/09 by bilbo]

The little one is for where the selector rod enters the main gearbox casing from the tail.

HTH

Shaun

[Edited on 3/1/09 by prawnabie]

The small seal is for the speedo drive gear,
the larger black one is for the input shaft.

Many Thanks Folks,

I feel slightly guilty now, why isn't there a list of registered traders? or add your self to the list of links so we can visit your shop.

ATB Dan.

Just ordered a set of seals and gaskets for my V6 box, feel slightly better now

ATB Dan.