Where can i get some nice thin stainless jubilee clips from?

I need 8 x 2 - 2/1/2 inch ones to hold my heat wrap on the exhaust headers. or any other suggestions.

I bought some stainless ties and theyr crap.

I usually go to the bay for stuff like that cos it's usually cheap and my nearest auto factors isn't that useful for stuff like this.....

I used stainless lock wire for mine.

I've seen people use the type of clips that hold CV boots on. Where you thread it through a look like a belt buckle and fold it back and stuff. Looked like a PITA so went for the lock wire.

HTH,
James

http://www.wrightsautosupplies.co.uk/

Stago nset

[Edited on 7/4/09 by r1_pete]

I have got a load of them here. Might be a bit wide for you at 13mm. U2U me your address and I can post them if you want them.
I have been slowly using them over the years as I got them from the pneumatics system on some old computer tape drives about 20 years ago.