Board logo

Type 9 gearbox, reverse light switch?
albertz - 1/5/09 at 12:05 PM

I am looking for the small switch that detects when reverse has been selected. Mine has somehow become lost during the engine transplant.

Where can i buy these new?

Does anyone have a spare one lying around?

I have the electrical connector part, its just the switch part that i need.

Thanks


prelude1980 - 1/5/09 at 12:11 PM

There's 1 on ebay at the moment

Ebay Link


clairetoo - 1/5/09 at 03:10 PM

I've got one on a scrap box - are you going to Stoneleigh ?
If not I can bung it in the post


albertz - 1/5/09 at 05:42 PM

Thanks both for the replies. Claire i have sent you a U2U.

Cheers


thefreak - 1/5/09 at 05:44 PM

Where abouts on the box does it locate... not sure if mine has one


albertz - 1/5/09 at 08:40 PM

On my gearbox the switch fits into a small circular housing just in front of where the gear lever bolts on, on the right hand side. It should have two round pins protruding from it.

[Edited on 1/5/09 by albertz]


clairetoo - 1/5/09 at 08:48 PM

I checked the one I have - it has a single connector (might be from a four speed box ?)
Any good ?


albertz - 2/5/09 at 06:27 AM

Unfortunately i dont have my one to compare! but the mating electrical plug has two sockets on it for two terminals. Maybe as you say the 4 speed switch is slightly different. I am not sure it will work so probably better to keep hunting around.

There is a guy on Ebay selling them (as per link above) so will buy from there i think. Thanks for trying though.


stevegough - 2/5/09 at 08:01 AM

I was painting my type 9 yesterday - it has 2 pins exactly like the one in the ebay picture. HTH, Steve.