Does anyone know the cheapest place to get a 1.6 Zetec Pressure Plate?

I need one for the Pinto / Zetec Project.

Cheers in Advance

B

Get the 1.6/1.8 flywheel drilled and dowelled to accept the sierra diaphragm and plate. You can use the sierra release bearing with these and it will take more power than the zetec clutch without slipping.

[Edited on 15/6/09 by Dusty]

If you do go the pinto clutch rought i have got one you can have for free plus postage as i fitted it to my car and it slipped at 215BHP on rolling road so it would be ok for yours. It has only done about 300miles from new.