well i spent all day fitting my new super dupa large rad, i had to do a bit of trimming on the bottom of the nose cone but nothing major, its a very tight sqeeze under the nose but i hope it will do the job, ive put a photo in of my old rad so you can see the comparison of before and after!




as you can size the size difference is rather obvious

Flying Lady for the top of it?!

bets for how long it will be till someone posts a "why doesn't my engine get warm" question

Glad to know it arrived and hopes it solves the overheating :p

quote:

---

Originally posted by MikeR
bets for how long it will be till someone posts a "why doesn't my engine get warm" question

---

crikey Oh riley, what are you cooling? sizewell B?

well at least you'll know exactly how hot it isn't getting now

just don't shine the laser bit of the infra red thermometer in your eye!!!

Hey Alex, if that doesn't get it cool then I don't know what will!

Mine seems to be behaving at long last after the engine swap. Took it out today and did 12-15 miles no problems (would have been boiling 4 times over previously)
I've baffled around the rad and this evening cut a couple of vents in the bonnet sides.
Cheers,
John.

Nice shiny rad .

But what's that small black thing in the middle of it???

quote:

---

Originally posted by Xtreme Kermit
Nice shiny rad .

But what's that small black thing in the middle of it???

---

Well, if that doesn't work you could always try...



[img][/img]

wow, now that is a big rad, i hope it work's ok.

you could fit enough couple of fans in.lol

stuart

whos nosecone are you using, and what size is that radiator please?

was the old pinto getting that hot then?
what was the temp with the other rad fitted?

nice rad though