well definately worth a try anyway
HTH
*edit*
ooh 2100 posts
[Edited on 15/7/09 by eccsmk]
where can I get one of the above? think i'm going to stick with the 9 lump as a replacement is about a quarter of the cost of a zx12!
here
well definately worth a try anyway
HTH
*edit*
ooh 2100 posts
[Edited on 15/7/09 by eccsmk]
thought they would be worth a go....heard they're a bit pricey though!?
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
not measured properly but looks like about 3"
Get the standard zx9 sump choped. "Deneo" done mine for me. U2U him for details.
Like Matt, Deno chopped my sump. I also put in a baffle plate at the same time when it all went back together.
Cheers
Craig
quote:
Originally posted by mistergrumpy
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
quote:
Originally posted by JoelP
quote:
Originally posted by mistergrumpy
Do you need a shortened sump? I know I don't and I get over the speed bumps fine and onto the SVA rollers no problems.
how much sump sticks out the bottom of your car? I had an inch off the sump and still had an inch out the bottom, with the air filter touching the bonnet.
I have about the depth of the sump lobe sticking from the bottom but then I have taller bodywork by Luego so I hitched the engine up so its touching
the bonnet too.
I can measure it to be exact if you like.
Franky, if you mean you U2U'd me then I haven't got anything through.
[Edited on 16/7/09 by mistergrumpy]
