As the title says, I need a propshaft for my Locost. The current one I have has a little slack on the rear cross,hence cannot balance it. Unfortunately its a press fit one (not the circlip type).

Other than sourcing another propshaft from a MK2 escort cutting welding & balancing, are there any cheaper options with regard to buying one ready made?

I just got mine back from driveshaft uk, excellent service and quality product - fully recommend them.

Hi mate, you ok? I used Dunning and Fairbank in Leeds, www.propshafts.co.uk and they were great and reasonably priced, all they needs was a measurement was from the diff face to the oil seal on the gearbox. You may want to email them to ask what they need and you could then supply a drawing.

I'm always around that area so could collect for you, thats not a problem and poss meet up when you next fly into Leeds/Bradford?

Take care mate.

See ya

Rich

i used D&F too, highly recommend

The one I got with my build was from Bailey Morris - have had contact with them about sizes etc. and they've been really helpful.

Prices weren't too bad either, from what I remember.

What was said above about D&F but if it's easier they have a branch near Heathrow at Feltham called Propshaft Services tel: 00442088442265. who were very helpful.
They fitted a larger UJ to mine, did it in a couple of hours and charged the princely sum of £25.
Cheers, Pewe

[Edited on 4/8/09 by pewe]

for getting a new prop made, d&f came in about £40 cheaper than bailey morris

I used D&F too, highly recommend them.. good price too...

D&F again

As good a service as you will get anywhere.

Thanks Guys, I'll give them a call and see what they tell me.

I'm doing ok Rich, how about you? If I do fly to leeds I'll definetly give you a shout

Should you ever fly down to where I am for some sun/holidays pls let me know too, this time drinks on me