Board logo

2.0ltr Zetec Headbolt Torque Settings Needed ASAP!
owelly - 13/8/09 at 07:04 PM

I'm asking for a fellow forum chum over on the PPC forum.
I seems to think it's 30 Nm + 90 degree's + another 90 degree's but I know you folks will be certain!!


Myke 2463 - 13/8/09 at 07:15 PM

Up to 4/98
Stage 1 25nm
Stage 2 45 nm
Stage 3 angle tighten 105 deg

From 5/98
Stage 1 15nm
Stage 2 40 nm
Stage 3angle tighten further 90 deg

Care of Haynes,

Mike.


owelly - 13/8/09 at 07:19 PM

Many thanks!! I knew you guys know everything......


owelly - 13/8/09 at 07:20 PM

http://ppcmag.co.uk/forum/topic.asp?TOPIC_ID=6929