anyone got a cad drawing of a vauxhall redtop inlet i can have ??

dave

that will be a no then ??? ;p

That'll be a maybe then. I'll have a looky.
DWG or DXF format??


OK I have a drawing of both the exhaust AND Inlet Manifold flange ( Did them meeself).
Not sure exactly how accurate they are as the inlet one does not have the "bump " for the injectors. I don't think I ever finished them completely but you could do a print out on a 1 to 1 scale and see if it fits ( like a gasket)
You're welcome to it and IF you need the injector bumps then measure them from your head ports and I'll alter the drawing to suit before sending it.

[Edited on 26/8/09 by omega 24 v6]

[Edited on 26/8/09 by omega 24 v6]