Board logo

MT75 gearbox drawing
r1_pete - 31/8/09 at 10:40 AM

Has anyone got a blow up drawing, or strip and rebuild info for the MT75 box they can let me have a copy of?

[Edited on 31/8/09 by r1_pete]

theconrodkid - 31/8/09 at 10:59 AM

http://images.google.co.uk/imgres?imgurl=http://www.fordscorpio.co.uk/images/mt75.gif&imgrefurl=http://www.fordscorpio.co.uk/mt75.htm&usg=__UP r1zm9inLwwiJwgvx_4HXyWBwk=&h=843&w=600&sz=58&hl=en&start=3&tbnid=_R1AwgdNDUG20M:&tbnh=145&tbnw=103&prev=/images%3F q%3Dmt%2B75%2Bgearbox%26gbv%3D2%26hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-GBfficial%26sa%3DG

big_wasa - 31/8/09 at 11:18 AM

pic

big_wasa - 31/8/09 at 11:21 AM

Ive also got a work shop pdf if the above doesnt have what you need.

r1_pete - 31/8/09 at 01:42 PM

Thanks guys, what I'm trying to do is work out if I could mod the input sleeve for a concentric hydraulic slave cylinder.

big_wasa - 31/8/09 at 02:51 PM

Didnt they come with them as standard in the scorpio ?

r1_pete - 31/8/09 at 04:02 PM

quote:
Originally posted by big_wasa
Didnt they come with them as standard in the scorpio ?


Yes but the castings different with the starter on the opposite side.

I was hoping I could remove the input shaft housing and either replace it with a scorpio item, or machine it to take a saab or similar, sorpio release bearing £160, what are they on?

Just bought another box for £28 to have a play with, hence the drawings request.

Maybe some cheap mt75 internals available soon.