Board logo

Photo Appeal - 4age Mounts in Locost 7
nib1980 - 19/10/09 at 09:44 AM

Hi All

I'm looking for photos of the a 4age mounted in A locost 7 (preferably a Stuart Taylor)

I'm trying to work out what engine mounts people have used and how I can do it in Mine.

Gearbox mounts would be a bonus too

Many thanks

Neil

oldtimer - 19/10/09 at 12:02 PM

No pics I'm afraid, but I used Raw's stainless engine mounts and very nicely made they are too.

nib1980 - 19/10/09 at 12:26 PM

quote:
Originally posted by oldtimer
No pics I'm afraid, but I used Raw's stainless engine mounts and very nicely made they are too.


are they the off the shelf mounts?

could you take any pictures please?

many thanks

oldtimer - 19/10/09 at 05:56 PM

New pics in my photo archive: chasis mount, left mount and right mount.

nib1980 - 19/10/09 at 06:07 PM

YOUR A STAR

many thanks.

i think these are gonna do my job just nicely.

did it all come as a set from raw?

and what is the distance it from the block face, to the outer threaded portion that connects to the chassis mount?

sorry to be a pain, but i hate wasting money

many thanks again

oldtimer - 19/10/09 at 10:33 PM

They were bought from someone who bought a motor from Raw but changed plans, but I think they are a Raw standard items. Will measure up tomorrow.

oldtimer - 20/10/09 at 07:21 AM

Best I can measure is 130mm right and 125mm left - give or take a few mm, give Raw a call and ask, they don't bite and are very helpful. Cheers.

nib1980 - 20/10/09 at 07:31 AM

quote:
Originally posted by oldtimer
Best I can measure is 130mm right and 125mm left - give or take a few mm, give Raw a call and ask, they don't bite and are very helpful. Cheers.


PERFECT.

Many thanks

Neil