Hi All,

I've just added a couple of new sections to our website.
The first is a sump kit to fit Ford's duratec

http://www.3gecomponents.com/templates1/view_department.php?department=3532&site=63

This is the sump that the forum's own Flak Monkey has developed. Davids done a cracking job with this. These are jig built and finished to a high standard. And a lot cheaper than other alternatives. We'll also able to offer this in DIY form for home builders.

And we've started to offer inlet & exhaust flanges, this list will grow in time, but at the moment covers the more popular ones, eg Duratec Zetec, Pinto etc.

http://www.3gecomponents.com/templates1/view_department.php?department=3531&site=63

All these parts are available through either ourselves or through David (Flak Monkey)

Kind regards

John

are there any plans for a zetec sump in kit form?
would be very interested

A Zetec one might be a bit trickier, as you have the joint line for the sump in line with the crank.

It's not impossible, just requires some creative thinking.

Kind regards

John

I will do a zetec design at some point, don't have the time at the moment though unfortunately.