Im after a 1/8 npt female to 1/4 npt male adaptor for my pressure sender.

Wheres the best place? Burtons have one for nearly 8 quid posted?

Any local engineering supplies place should be able to sort you.

Will only bea few quid for a brass one.

David

Have you checked these...

Vehicle Wiring Products
ETB Instruments
Rally Design
Russbost (on here)

Hydraulics engineers should be able to help for peanuts

Hello Dan,

Go down to PIRTEK on Wherstead Road. I got a couple of adapters there for reasonable money when I couldn't find anything anywhere else. They have everything on the shelf.

Cheers
Stu.

Cheers stu ill try pirtek later. i know a bloke down there also. Off the shelf is nice.

another vote for pirtek..... rally design/merlin and others wanted £20 odd quid for a couple of bits I wanted + post.

Pirkek, £5

As long as the thread length is short it is not uknown to bodge NPT with bsp fittings.

On both the difference in T.P.Iand O.D. isn't massive - 1 tpi and 0.08-0.09 mm in both 1/8" and 1/4" bores

1/8" to 1/4" BSP adaptors are cheap as they are used for airbrush to compressor connections.

[Edited on 25/11/09 by britishtrident]