Hi

Have been in contact with a Sparkplug lead manufacturer and have obtained a discount for Locostbuilders

I Organised the same deal for the Westfield forum (WSCC) a while ago and it went very well

Sorry but the offer is for Car Engined Cars only

This is their Website: http://www.performanceleads.co.uk

The discount works out about 25% off the advertised prices

You need to speak to: DAVID UPWARD

His contact details are:

Tel: 0044 (0) 1208 264546

Fax: 0044 (0) 1208 264547

e-mail sales@fastlaneauto.co.uk

They can supply custom made leads if you supply the relevent sizes and will also mark them up 1,2,3 etc and supply them in a range of colours

David is very helpful and will advise on final cost & cable spec' etc

I don't have any connection with the company apart from being a satisfied customer

You need to speak to David directly and say you are part of the Locostbuilders forum

Hope this helps and saves folks a few quid to spend on upgrades

Cheers
Perksy

hi, how long will the offer be available for?

Hi

No time limit was mentioned but a quick call to David will advise further

HTH

just ordered a set from David today. They didn't actually list the C20XE on their website, but he is making them up to my measurements, and the total cost inc del is a touch over £30.

Bargain! Thanks, Perksy!

Ok, they came - very quickly - but - they were the wrong length despite being tailor made! The reason for this is he asked me for the 'exposed length' of the lead - this didn't take in to account the ends were of a different design. They ended up nearly an inch short - not good - however, when I rang him again (he wasn't in but one of his collegues dealt with me) she was very helpful and apologetic, and they quickly made up some more (measuring tip to tip this time) and - once again they were delivered next day.

All round, a good firm to deal with, I think, guys.

quote:

---

Originally posted by stevegough
Ok, they came - very quickly - but - they were the wrong length despite being tailor made! The reason for this is he asked me for the 'exposed length' of the lead - this didn't take in to account the ends were of a different design. They ended up nearly an inch short - not good - however, when I rang him again (he wasn't in but one of his collegues dealt with me) she was very helpful and apologetic, and they quickly made up some more (measuring tip to tip this time) and - once again they were delivered next day.

All round, a good firm to deal with, I think, guys.

---