Board logo

Totota 4age 20v gaskets
The Knobs - 27/12/09 at 11:01 PM

Anyone know the best place to source 20v gasket set for an engine strip and rebuild ? Not sure if they can be ordered through any Toyota dealer being an import engine.

turbodisplay - 27/12/09 at 11:05 PM

I bought a gasket set from ebay for a 3sgte.
Apart from the cork sump gasket leaking, it has worked fine.
Darren

The Knobs - 27/12/09 at 11:11 PM

So all the gaskets fit ok with enough and the right holes in the head gasket, and does it come with bolts ? I will use sealant for the sump anyway.

turbodisplay - 27/12/09 at 11:16 PM

Yep, they were good,exact fit, head was for a later version as i wanted a metal head gasket, done 1000 miles so far, head gasket has been fine.
Oil seals were good quality.
Darren

[Edited on 27/12/09 by turbodisplay]

bimbleuk - 28/12/09 at 06:59 AM

quote:
Originally posted by The Knobs
Anyone know the best place to source 20v gasket set for an engine strip and rebuild ? Not sure if they can be ordered through any Toyota dealer being an import engine.


Fensport might still stock the gasget sets.

You can get most parts from the Toyota dealers for them. I needed the hydraulic cam belt tensioner recently. I down loaded the Toyota EPC and found the part number. I printed the part picture with numbers and made sure it matched what the parts department were going to order.

Luckily they had one in stock in the UK so there's probably a lot more parts sharing that we realise.

I don' think there are any Toyota sump gaskets. The closet I know of is for the 7AFE. Even then only Chrysler fitted one as they used the engine as well.

[Edited on 28-12-09 by bimbleuk]

Worzey - 28/12/09 at 10:51 AM

I got a head gasket from Fensport (back in May) so that would be my first call. Excellent service as well.

Pete Jordan - 28/12/09 at 11:00 AM

You could also try BPJ Services, who build/modify 4AGE 16V and 20V variants.

LINKY

Pete

Worzey - 28/12/09 at 11:38 AM

If I recall correctly, BPJ Services didn't stock the gaskets the last time I tried hence the call to Fensport and the shinney new TRD gasket.

They may have them now so this would be my second call.

Both companies offered excellent service as I have used them both several times in the past.

Werner Van Loock - 28/12/09 at 12:23 PM

last resort?

silvertop 20v ebay
blacktop 20v ebay

whenever looking for 4age parts on ebay internationally search for 4ag* as the 4age is mostly referred to as 4ag

[Edited on 28/12/09 by Werner Van Loock]

COREdevelopments - 28/12/09 at 02:51 PM

toyotas never came with sump gaskets. they used grey sealer called ultragrey. but any good quality sealer will be good. toyota dealers can get the majority of import parts. it helps if you know the model code and the 1st few digits of the chassis number. also helps if you got a good parts guy behind the counter too as some cant be bothered.

Rob

blockhead_rich - 19/1/10 at 09:42 PM

Hi
I might be able to obtain a head gasket set Part No. 04112-16210 > see the following web page for info > http://opc.mr2oc.com/online_parts_catalog/20v/gasketkit-overhaul-valvegri.gif

For about £100. Would you be interested
Rich