i want to see if my engine will fire up before i carry on with the rest of the car...

is there any way i can fire it up without adding all the other bits and wiring...

i have the carbs fitted and a dummy exhaust..

the timing is all correct and ready to go..

its a 2.0l pinto on points ignition....

cheers

Barry

yep. i wired mine up with just the ignition wired striaght to a battery (edis), gravity fed fuel, and battery straight to the stater, and a push button to the solenoid.

just don't run for more than about 20secs or so if you've not got a cooling system

and set up a video camera obviously

If it's got the stock pump then use that rather than gravity feed. Just dunk a pipe in a can of fuel. And have the return go back to the can.

TT

interesting.....

i have a facet pump but where is the return on the 48dcoe carb?

no return on a dcoe