Just bought a 2.0 zetec and some kawasaki zx9r b1 carbs, The carbs dont have a tps, was going to use maf, What size jets do i need to put in?

1.5 then go up .5, i have a 2.0 pinto with 1.7.
Get the small drill bits from Cromwell tools if you want i have a couple of 1.7 i can send you, just u2u me your address.
Or you could do a search on jet size.

[Edited on 14/1/10 by kj]

My 1.8 zetec has 155's in and standard needles. Runs nice and goes like stink so theyr not far out. When i got them originally from bogg bros they were setup for a 2 litre and had 190's in which i thought ran a bit rich in my 1.8.

our 2.0 pinto is running 1.6 mains and is actually slightly rich throughout most of the rev range.