Hi All,
Well if youve been following my progress, ive fitted the turbo, and took it for a spin to the SG7 meet.
Apart from an oil leak from the turbo feed (jubilee clip not fitted properly / thread stripped) it worked very well.
I am disappointed though, as i was expecting some very agressive power but all i seem to have got is a slight increase and about 1/3 more torque.
Does anyone have a compressor map for a TD04 turbo? I want to check the map to see where i am in the pressure maps, and make sure the turbo is large
enough for the installation before i go any further.
It makes a great sound when it spins up, and there is a noticeable difference, just not as much as i was expecting.
now, where did i put that supercharger....
found it
http://www.rbracing-rsr.com/turbo/TurboMaps/td04-13g.gif
This'll be what you need
There are a load more here:
http://www.stealth316.com/2-3s-compflowmaps.htm
For different versions of the TD04 turbo. Links are just over 1/3rd the way down the page.
Do you know what boost you are getting and what AFR under boost?
[Edited on 7/2/10 by flak monkey]
what psi are you running because on most turbo cars you only get a good kick when your running 15psi boost.
adam
what compressor do you have ?
Thats strange...I have the same unit fitted to my engine, when boost comes in its savage, pretty frightning really. Ime looking to tone it down a
little
quote:
Originally posted by oadamo
what psi are you running because on most turbo cars you only get a good kick when your running 15psi boost.
adam
I know, i know, the risks of blowing up the engine etc etc... 
quote:
Originally posted by MakeEverything
Hi All,
Well if youve been following my progress, ive fitted the turbo, and took it for a spin to the SG7 meet.
Apart from an oil leak from the turbo feed (jubilee clip not fitted properly / thread stripped) it worked very well.
I am disappointed though, as i was expecting some very agressive power but all i seem to have got is a slight increase and about 1/3 more torque.
Does anyone have a compressor map for a TD04 turbo? I want to check the map to see where i am in the pressure maps, and make sure the turbo is large enough for the installation before i go any further.
It makes a great sound when it spins up, and there is a noticeable difference, just not as much as i was expecting.
now, where did i put that supercharger....
quote:
Originally posted by jacko
quote:
Originally posted by MakeEverything
Hi All,
Well if youve been following my progress, ive fitted the turbo, and took it for a spin to the SG7 meet.
Apart from an oil leak from the turbo feed (jubilee clip not fitted properly / thread stripped) it worked very well.
I am disappointed though, as i was expecting some very agressive power but all i seem to have got is a slight increase and about 1/3 more torque.
Does anyone have a compressor map for a TD04 turbo? I want to check the map to see where i am in the pressure maps, and make sure the turbo is large enough for the installation before i go any further.
It makes a great sound when it spins up, and there is a noticeable difference, just not as much as i was expecting.
now, where did i put that supercharger....
Get that oil feed repaired properly a mate of my son lost his skyline in a massive fire when the same pipe came off his turbo and sprayed oil over the engine /exhaust hi was very lucky to get out the car alive
jacko
if thats a 13c on there , you should be pulling full boost by about 2500 rpm
quote:
Originally posted by Volvorsport
if thats a 13c on there , you should be pulling full boost by about 2500 rpm