Good morning all,

With regards to my choke/accelerator cables I have bought two generic items.

I understand that a bike shop will be able to put on the ends I need, could anyone advise what I should ask for? The choke and one end of the accelerator cable needs to fit to a set of ZX9R carbs and the other end of the accelerator cable needs to fit to my pedal box as show below. It would appear I also need some way of securing the outer cable in the pedal box.

noone has fitted a choke or accelerator cable to their ZX9r carbs !

2 hours without a response.. you have me worried I wont be able to get the car going from the drivers seat!!

I've not got that far yet, so I'd like to see what other folk have done too

i bought a venhill cable,

It came with the bit on one end for the carbs, and then came with a bunch of adjuster and solderless nipples and clevises etc that i am going to use to attach it to my pedal.

ETA im not using zx9r carbs, but id imagine the fixing is the same on most

[Edited on 3/3/10 by Miks15]

dont forget the bolt in your steering colomn

lol dont worry, bolts are fitted - that picture is way old but is the only clear one I have.

FYI I need a 3 solderless nipples, and a cable adjuster.

Robert, I'm going into the bike shop on saturday so I will u2u you the details of the parts I buy ready for when you're at the same stage.

whenever that is
(my dad & brother are both into there bikes so I'm sure they'll have something I can use...)


I take it those bars turned up ok today ?

[Edited on 3/3/10 by mcerd1]

I work a million miles from home so I'm not sure yet! I was going to pop you a message when I got home to let you know.

Stop stealing emoticons from the dax forum