Board logo

Source of M12x220 8.8 bolts ?
Tris - 27/3/10 at 08:48 PM

Hi all,

Currently trying to source two M12x220 8.8 bolts, which i need to mount my engine.

Namrick, google and ebay have all drawn a blank - does anyone know where i could get a couple ?

Cheers
Tris

RichardK - 27/3/10 at 08:54 PM

Any good? Linky

Cheers

Rich

tomgregory2000 - 27/3/10 at 08:54 PM

what about some studding with a nut welded on top?

RichardK - 27/3/10 at 08:55 PM

Wouldn't even bother welding a nut on, just use nylocs at each end..

Rich

Tris - 27/3/10 at 08:57 PM

I didn't want to go with threaded bar as the way the engine is mounted in the GTR, the entire weight of the engine acts as a downwards shearing force on these bolts.

So ideally i was looking for a couple of bolts, but thanks for the suggestions

coozer - 27/3/10 at 09:00 PM

Got a TOOLSTATION nearby???

RichardK - 27/3/10 at 09:06 PM

Could these if they'd sell you a couple? Linky

Cheers

Rich

Mal - 27/3/10 at 09:07 PM

Here you are:

http://www.shop4fasteners.co.uk/acatalog/Hexagon_High_Tensile_Bolts_Zinc_Plated_BZP.asp

With the length you want.

RichardK - 27/3/10 at 09:13 PM

What about cap head? Linky

Tris - 27/3/10 at 11:07 PM

quote:
Originally posted by RichardK
What about cap head? Linky


Fantastic - thanks for all your help, just hit the 'buy it now' button for the cap heads

RichardK - 28/3/10 at 08:17 AM

No probs mate, I'm good at spending other peoples money

Cheers

Rich