Board logo

anyone have an engine for sale
bhp - 19/5/10 at 12:26 PM

Hi does anyone have an engine for sale pref 2.0 zetec on carbs to suit type 9 box?

anything considered i just want to get it up and running again.

cheers james

coozer - 19/5/10 at 12:27 PM

I have a 2.0L T16 Rover turbo engine for sale if you fancy that instead.

andylancaster3000 - 19/5/10 at 12:32 PM

I have a brand new 1800 silvertop zetec short engine (complete bottom end with all pumps and sump) as well as a complete rs1800 fiesta zetec engine now surplus to requirements.

Let me know if interested

scootz - 19/5/10 at 12:45 PM

I have a 1.8 Mazda MX5 engine (MZR - pretty much a Duratec, but with VVT).

liam.mccaffrey - 19/5/10 at 12:55 PM

I have a 1600 K series

iank - 19/5/10 at 12:57 PM

2 litre pinto + T9 was posted for sale today.
http://www.locostbuilders.co.uk/forum/34/viewthread.php?tid=136410

bhp - 19/5/10 at 01:01 PM

You lot answer quick....

Interested in the zetecs U2U me price.

How does the MX5 mate up to a type 9 box or is it just as easy to use mazda box.

rost - 19/5/10 at 01:09 PM

quote:
Originally posted by bhp
You lot answer quick....

Interested in the zetecs U2U me price.

How does the MX5 mate up to a type 9 box or is it just as easy to use mazda box.


Depends, the older NA/NB BP engines bolt straight up to the same NA or NB MX-5 gearbox, which is a pretty light and good shifting unit imho. The BP engine is a little on the heavy side but has a lot of potential for tuning.

The newer Duratech based MX5 (NC) engines bolt either to a T9 with a different bell house or to the NC 6-Speed gearbox. I'd go for the latter option, you'll have an all ally driveline with pretty good ratios. It might be on the expensive side though!

coozer - 19/5/10 at 01:25 PM

Mazda 6 speeder is mighty heavy, better off with the much lighter 5 speeder imo.

02GF74 - 19/5/10 at 02:34 PM

your location?

I have pre '95 2.0 litre block, disassembled with other bits - don;t think there is flywheel plus a 1.8 zetac assembled and more complete, plus full gasket set (that alone cost more than £ 50)

don't even ask why

u2u me with serious offer I cannot refuse.

scootz - 19/5/10 at 03:50 PM

quote:
Originally posted by bhp
How does the MX5 mate up to a type 9 box or is it just as easy to use mazda box.


Easier to just use the Mazda box! The one I have going spare is an 08 engine... comes with 5-speed box attached. I need the space, so would sell them for £850. Factor in around £50 for pallet delivery.