Board logo

Megajolt - Where did you put the Coil Pack ???
karlak - 11/7/10 at 04:32 PM

Got the car running on the basic EDIS and coil pack today - Starts a lot better

Anyway, before I get the Megajolt fitted, I want to secure the EDIS and Coil Pack. Sorted the EDIS, but am struggling on a good position and a way of fixing the Coil Pack.

Has anyone got any pictures of the way they attached it to a MK Indy type ? Just need a bit of inspiration really

big_wasa - 11/7/10 at 04:34 PM

What engine ?

karlak - 11/7/10 at 04:38 PM

quote:
Originally posted by big_wasa
What engine ?


OOps, its a Pinto.. But, I guess any other engine setup ideas would be applicable as well.

RichardK - 11/7/10 at 04:40 PM

I put mine on the bulkhead but I have seen a couple on top of dizzy shaft on a bracket where the dizzy cap used to be, looked sweet.

Cheers

Rich

big_wasa - 11/7/10 at 04:59 PM

Fiesta has a bracket that mounts to the block under the inlet manifold.

Out of the way.

rusty nuts - 11/7/10 at 05:38 PM

Used the top bell housing bolts and a home made mounting plate

dave r - 11/7/10 at 06:55 PM

i made a bracket for mine to fit ontop of the cut off dizzy

karlak - 11/7/10 at 07:27 PM

Cheers Guys, Like the top of the Bellhousing bolt idea.

I have been messing about with a old distributor today as well. But am struggling getting the thing back together.. Is it normal for the "shaft" to have a bit of play (up and down)..