Board logo

Where to buy a Zetec exhaust???
Barronge - 5/8/10 at 12:00 PM

Hello,

Just sorted out my rad, ECU and other bits for the engine, i was wondering if anyone knew of a decent company that supplies a complete Zetec exhaust for a silvertop engine.

The cheaper the better obviously lol

Mal - 5/8/10 at 12:12 PM

Not necessarily cheap, but you could start by looking in Westfield Sportscar's online shop.

MikeR - 5/8/10 at 12:27 PM

define complete? if you can weld you can get the parts from robin hood.

define cheap? MK will make one (along with a few others).

Barronge - 5/8/10 at 12:42 PM

Complete as in everything pre built and ready to fit and cheap as in not Westfield or caterham lol

FrankP - 5/8/10 at 12:53 PM

I got my manifold and exhaust from robin hood.

Passed the IVA with them.
Didn't need any welding.
Cheers
Frank

loggyboy - 5/8/10 at 12:54 PM

Trouble is a complete exhaust will need to be made up to suit indivdual vehcles, based on engine position, angle and exit point. Buying an 'off the shelf' one from mk/raw etc may end up not suiting your car.
Maybe better of speaking to a specialist menufacturer?

Barronge - 5/8/10 at 02:04 PM

Good point..... new question then, does anyone know anyone who can make them???

dan8400 - 5/8/10 at 03:08 PM

Tiger have them on the shelf. Mine sounds awesome


Dan

Jasongray5 - 5/8/10 at 03:31 PM

Adapt an st170 manifold?

big_wasa - 5/8/10 at 04:00 PM

I really would NOT buy the tiger manifold.. Mine is from Fisher sports cars but I did need to make up a link pipe.

norfolkluego - 5/8/10 at 05:55 PM

quote:
Originally posted by big_wasa
I really would NOT buy the tiger manifold.. Mine is from Fisher sports cars but I did need to make up a link pipe.


I bought my manifold from Fisher (already had the rest of it), nice bit of kit and not too pricey. Our local fabricators (who do a good job I must admit) wanted almost twice as much as Fisher for the manifold.

dan8400 - 5/8/10 at 06:05 PM

Can I ask why not the tiger exhaust? I'm not trying to cause an arguement I'm just curious. Have you had a bad experience with them?
I only ask because my system is well made and slots together a treat. Not to mention the sound, which is awesome

Barronge - 5/8/10 at 07:07 PM

You see I like the tiger exhaust... But I also like the fisher exhaust.. But which is best, there's only one way to find out.................FIGHT!!!!!!

Seriosly though how much was the fisher

big_wasa - 5/8/10 at 08:40 PM

Ive owned both.

With the tiger the quality and the welding was very poor but its did fit together just.

BUT it exits where the diagonal bars are in a locost. You will end up choping the chassis for it.

coozer - 5/8/10 at 08:47 PM

Got mine here....

http://www.aas-exhausts.co.uk/

Highly recommended.