Hi

Can anyone tell which is the best age of R1 (carbs) for a zetec.

Looking for a really simple setup using a megajolt ecu.

Thanks

As log as they are carbs not really a problem I am running zx9 carbs on mine with no problems. Either way you will have to drill out the jets

Just make sure they have a throttle position sensor - I suspect all R1 carbs will have a TPS though.

Stu

Has anyone used Bogg Brothers to set up R1 carbs?

Thinking about going to them for the manifold but wanted to know weather it would be worth sending carbs as well?

Yep, worth ringing BB, they will tell you what is required. I suspect if your purchasing one of their manifolds they will want the carbs off you.

I had my manifold made by boggs they just ask what the carbs were off and made it to suit

they did ask if i wanted to send the carbs to them for cleaning and set up

I declined i do all my setting up

I sent my fireblade carbs to boggs and they sorted the jets/needles.
Then sent carbs and new manifold back,top service from steve bogg.