Board logo

Oilfilter thread on Pinto
Jonte - 9/6/04 at 12:23 PM

Anyone knows what type of thread there is on an Pinto. IŽve measured it to 19mm on the tops of the thread.

Mk-Ninja - 9/6/04 at 12:29 PM

If you measure how many threads per inch there are Ill look it up in my tables.

Jonte - 9/6/04 at 01:11 PM

quote:
Originally posted by Mk-Ninja
If you measure how many threads per inch there are Ill look it up in my tables.


IŽll have a look tonight in the garage

greggors84 - 9/6/04 at 02:05 PM

i think its 3/4" UNF Threas

britishtrident - 9/6/04 at 03:40 PM

Definitely NOT 19mm a unified thread not metric --- 3/4" unf sounds right, you local motor factor will have this the info in the back of his filter catalogue. "TJ" fillter catalogues have the best info on this type of thing



[Edited on 9/6/04 by britishtrident]

Steve Hnz - 9/6/04 at 09:27 PM

Definitely 3/4x16 UNF. Should take a Framm ph16 or equivalent filter.