Board logo

2 scrap 1800 CVH's
gavin174 - 4/10/10 at 08:56 AM

morning all

I am having a clear out at the workshop and have 2 1800 cvh's removed from donors.

before i weigh them is there anything worth saving..

cheers Gavin

adrianreeve - 4/10/10 at 09:03 AM

The sumps are good for zetec conversions. May be useful for someone

femster87 - 4/10/10 at 09:33 AM

i'll have the sump off you mate if your selling.

Jenko - 4/10/10 at 10:16 AM

Does an 1800 CVH sump fit a 1600CVH?.

gavin174 - 4/10/10 at 10:17 AM

sorry I dont know.. hopefully someone more knowledgable will be along later

gavin174 - 4/10/10 at 10:21 AM

I do know someone with a 1600 CVH for sale...


only done 30,000 miles stood since 1995.

new battery and a bit of fuel and it started

deezee - 4/10/10 at 10:29 AM

1.8 CVH. Save the sump and oil pick up, worth a few quid for zetec conversions. Also the Distributor drive tends to snap, so they are worth saving as replacements are hard to find. Flywheel is also worth keeping as they are pretty light and useful for conversions.

Surrey Dave - 4/10/10 at 01:33 PM

Cambelt tensioner can be expensive and rare too!

Sump worth a good few quid as can be redrilled and shortened ('cos it's tin) to fit silvertop Zetec.

Flywheel lighter than Zetec one so can be used with a separate igniton trigger wheel.

Sump will not fit 1.6 CVH

[Edited on 4/10/10 by Surrey Dave]