Hi. Where can I get crimp on HT terminals for edis 4 coilpack? Converting a YB to run wasted spark, current leads are new but the ends are wrong. New leads with correct ends are £90, no need I hope!
Anyone???
Many THanks

Are these any good?

I just need the terminals at the top of the pic.. Thanks

I just open everybox of leads in Halfords until I find the ones I want.
When you say an EDIS coil pack I assume you mean a coil pack fired/controlled using EDIS and ECU.
Have a look at Fiesta leads.

Could do that! The spark plugs are down inside the cam cover 6 inches, herein lays the problem- gettin the leads on wont be easy with a conventional rubber grommet thingy. I have the long reach plastic connector type that fits the plug and cam cover correctly just need to adapt the coilpack end!
Found
this online. surely available in the UK somewhere???

The early silver top coil packs had a different type of connector, the latter black top coil packs had connections very similar to a normal dizzy cap.
Paul

I indeed have the early type coil pack..

[Edited on 16/11/10 by Craigorypeck]

Get a bunch of leads from a scrap yard, and change the ends onto your leads. Cheapest way I would think. HTH Ray

Thats a good idea! I'll give it a go..

Anyone have any scrap leads they wanna get rid of???

[Edited on 16/11/10 by Craigorypeck]