As above, been searching online for ages but why can't i find a stupid quinton hazell ct133 release bearing anywhere!??!?
A million points up for grabs for the first person to locate one.....!

If this if for a Zetec to type-9, try asking for one from a 3.0litre Capri (NOT a 2.8/2.9 etc), worked for me !

Burton Performance but if you require the thicker release bearing I found one marked 110 for the Capri in ebay

Have you tried ringing anyone or calling into your local motor factors? That how I got hold of mine. Took me 5 mins on the phone and collected it 2 days later.

Burton Power
Speedshack
Merlin
Rally Design

are 3 specialists that will probably carry it on the shelf. Pick up a phone.

Alternatively, most Motorfactors deal with QH so should be able to order it in for you.

quote:

---

Originally posted by stevebubs
Burton Power
Speedshack
Merlin
Rally Design

are 4 specialists that will probably carry it on the shelf. Pick up a phone.

Alternatively, most Motorfactors deal with QH so should be able to order it in for you.

---

I think the problem nowadays is that we all rely too much on the internet and online purchases. I am more guilty than most I reckon!

As already said, if you phone around it's amazing how easy stuff can be to find. I think I am going to start using it more as I'm always spending hours online looking for 'bargains' only to find something in the yellow pages.

I spent ages looking for somewhere to get paint for the kit and um'd and r'd for ages. Eventually I went into a local body shop and asked where they get there paints from and it turns out there is a place that specialises in auto paint 250yds from my work!

thanks guys,

like the typical internet junkie that i am, i haven't phoned anyone, i just assumed i'd find it online!
I'll do some calling round.

Someone mentioned a 110 release bearing, are you talking about the ECB110? Is this the same thing as the CT133?

Cheers,
andy

Another vote for a local motor factor

I walked in & asked if the deal with QH, the answer was yes.

Then asked them " Please could you call to enquire if a CT133 clutch release bearing is available from stock "

The answer fro QH was yes & my motor factor got it in the follwing day

I just used the release bearing that came with the box , i think its the standard sierra one and it works perfectly.Ive never been sure why the CT133 is always quoted as the only one that works.
Paul