Anybody know what ratios it has, thanks

http://www.xr4register.com/gearratio.php

Ratios are the best you can get on a standard Ford box except for the Cossy T5
3.36, 1.81, 1.21, 1, 5th don't know
If you are thinking of fitting it (I have), needs a spacer between gear box and bell housing for a Ford inline 4 as the input shaft is longer than the Type 9 fitted to the I line 4 cylinders.
Because the spacer makes the gearbox 30mm longer either the box goes back in the chassis or the engine forward, that means propshaft issues, exhaust exit from the side panel, etc
Any advice on fitting let me know

[Edited on 16/1/11 by snapper]

if you u2u me an email i have some details on them

dave