Anyone had any experience of these? zetec turbo n/a exhaust manifold adaptor plate XR/RS/SI on eBay (end time 26-Jan-11 21:29:00 GMT)

A locost answer to my exhaust for the Zetec transplant would be helpful, but I don't want to spend £40 on something that is a 'bodge'.

Anyone had any experience? Or can offer an alternative?

Cheers

I fitted a CVH exhaust to my Zetec. I just cut a Zetec flange off a Focus exhaust manifold and welded this to the CVH flange [with a bit of cutting & grinding to allow access to the stud holes.

I cna't see why this wouldn't work if you don't want to weld it up.

Stu

Thanks Stu.

can't weld unfortunately (must remedy this) so i think its worth a try.

I'll report back if its any good.

I have bought one of his adaptor plates.the quality is excellent
and a good price i thought.Like yourself i wanted to use a
cvh turbo manifold and didnt want to butcher anything.

Andy

Thanks Andy.

I'll give it a go, and post up some pics further down the line.

I'll take some tomorrow and post them.

Andy