Hi all,

Does anyone have the part nos for the correct clutch plate and cover for a zetec.
The ones we use when fitting to a type 9 box. It is for the 1.8 flywheel.
I had the info saved but have lost it.

Cheers,

Andy

Im using the standard 1.8 zetec on with the Capri release bearing, i did run with the standard release bearing but read that the travel of the bearing would be too short after a time resulting in loss of clutch, whilst there would still be plenty of meat on the clutch plate

Yes i already have this set up in my mk.a friend wants to order the
parts for his build but needs the part no's.
I did keep the no for future reference but have lost them.

Andy

ct133 is the bearing number

FORD MONDEO MK1 1.6 & 1.8 / MONDEO MK2 1.8 CLUTCH KIT on eBay (end time 01-Apr-11 23:21:02 BST)

QH part number of mine was QKT690AF. If you bang that into google, loads of suppliers will pop up .

Thank you gentlemen.

Andy

Important bit is the THE DIAMETER IS 220MM WITH 1" 23 SPLINE centre.



FORD MONDEO MK1 1.6i 1.8i 94-96 NEW CLUTCH KIT on eBay (end time 12-Apr-11 12:55:13 BST) is £30 posted to your door

As always this forum is the best.

Thanks for all the replies/advice and for pointing me in

the proper direction

Andy