Board logo

bike carb gasket to zetec
Fishface - 30/5/11 at 10:50 AM

I have a set of bike carbs on a bogg bros manifold for a zetec. I know they sell them but what do people use? Is it cheaper to just use a motor factors supplied standard zetec one?

Thanks

r1_pete - 30/5/11 at 10:56 AM

I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues.

whitestu - 30/5/11 at 10:58 AM

quote:

I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues


+1

Stu

Fishface - 30/5/11 at 11:20 AM

That sounds cheap, do you just get it from the motor factor?

big_wasa - 30/5/11 at 11:40 AM

quote:
Originally posted by whitestu
quote:

I made my own from 0.75mm gasket paper, no problems at all, new owner has done a few thou too with no issues


+1

Stu


+ 2 but mines 1mm. If you get over this way I will give you a bit. I bought a roll on ebay. Do you live in Downham' or one of the villages I some times get over that way with work. Often around wimbotsham ect