Evening,

I have a pinto and I am trying to learn a bit about the wiring for it!

I have two wires coming out of the loom (Tiger Avon) which appear to be a red and a brown (but they might have been extended from the original loom in different colours!). These connect directly to the coil with one going to a terminal with a '1' on it and the other going to a terminal with '15' on it.

What do these wires do (i.e. are the switched live, earth etc) and how does the rev counter pick up the rev's from the engine?

Thanks in advance

Mark.

hi Mark

where abouts in Essex are you

I can put you in touch with Ray who runs the Essex Tigers Owners Club

or I can show you some generic diagrams if that helps.

vheers Gavin

Hi Gavin,

I know Ray well and have known him for several years :0)

If you have any info/diagrams that would be great. I am swapping to Duratecand am trying to figure out the wires I have!

Mark

You've prob already got this from my site but if not it may help, dunno but here you go Linky

Cheers

Rich

Thanks.

here are a few diagrams..

let me know if i can be any more help





[Edited on 10/6/11 by gavin174]