Board logo

can anyone help identify the year of this blade engine?
needforspeed - 7/7/11 at 09:50 PM

as titel really after a wiring diagram!




wylliezx9r - 7/7/11 at 10:01 PM

There should be some numbers on the engine, that would be better to identify the engine.


welderman - 7/7/11 at 10:16 PM

looks like an early one, 85/86, check cc size then you will get a better answer


ReMan - 7/7/11 at 10:21 PM

As said engine number, it should tell you the cc on the block

I suspect early 893 though at a guess. Is the a TPS on the carbs?, is there a sensor onto the gearbox? (Not the neutral swithch)


needforspeed - 7/7/11 at 10:23 PM

thanks for the replys il double check tomo not even seen the motor yet just been sent some pics and asked to wire it and get it running! :-/


mark chandler - 7/7/11 at 10:23 PM

its got a sight glass so a 918/919 which makes it 1995 ish

It will run with any early blade spark ECU, if you fit a CBR600 you can rev it a little higher.

diagram

provide power to the ECU and earth the side stand and neutral wires.

Earlier engines did not have TPS's so ignore if not fitted.


needforspeed - 8/7/11 at 08:30 PM

thats perfect thanks!!


needforspeed - 8/7/11 at 08:31 PM

engine code was sc33e 27485 anyway!


McLannahan - 8/7/11 at 09:03 PM

My engine (sc33e 2xxxx) was a 1997 919cc.