Board logo

Fury V8 Engine mounting
paulvdk - 18/7/11 at 03:12 PM

Hi all,

I am in the process of rebuilding a LHD Fury V8. I bought it as a stopped project and it is completely in parts...
I started with changing / strengthening the chassis.

Now I am trial fitting engine and gearbox.
Does anybody know how much lower the lowest point of the sump is measured to the chassis.
I cannot use the bonnet because that is stored at an other location.

Thanks in advance.

Paul from the Netherlands.

[Edited on 18/7/11 by paulvdk]

scudderfish - 18/7/11 at 04:04 PM

I'll try and measure mine tonight.

Regards,
Dave

scudderfish - 18/7/11 at 05:45 PM

As far as I can tell, my sump protrudes 65mm below the bottom of the lowest chassis rail.

Regards,
Dave

paulvdk - 18/7/11 at 07:06 PM

Thank you!

Regards, Paul

[Edited on 18/7/11 by paulvdk]

scudderfish - 18/7/11 at 08:07 PM

Let me know if you want any other measurements or photos.

Regards,
Dave