I am getting a Megajolt kit for my newly fitted 2.0 Zetec with webers.

I know for a start I can use the megajolt in 2D, but to use it as 3D (full map) I should use a throttle position sensor.

Weber have a kit but at a cost, a friend says they use a Fiesta TPS.

Anyone know which this is so I can look around in the scrappies.

Thanks

[Edited on 8/8/11 by sooty]

you can bodge virtually any 3 pin tps to work on the megajolt it just has to be made to fit on the end of the carbs/tb's

as above, any TPS should do. I used one from a Mondeo.

MInes a mondeo on fitted to my bike carbs.

Dont mean to hijack your thread but does anyone know where to get the spindle to conect the TPS to the carbs as there is not enough spindle protruding from the webers to conect to the TPS?