hi all, where can i get a inlet manifold for a zetec 2.0 blacktop i have tried ford £40!!! and others wont help as i dont have a reg,so any online suppliers?

Do what i do and make your own gasket.
The gasket material is only about a fiver on ebay.

Andy

GasketsForClassics on eBay is where I'd start, they seem pretty accommodating. They might do you just the inlet gasket if you email them.

Edited to add, I've done what Andy suggests, gasket material is available cheaply on eBay.
I used a fuel-proof cork-looking type stuff, it's been fine for 3 years or more.

[Edited on 18/10/11 by UncleFista]

thanks guys should have mentioned i want to use it as a template to make a bike carb manifold so need to get hold of one really

Link

Retro ford.

£6.13

Perfek thanks

I sell the inlet flanges in both steel and alu if you want to save yourself the effort

How much delivered mate? Price for both materials please

Was told to use a 1.8 plastic one and not the 2.0 metal one when I fitted the engine 10 years ago. Been on and off many times and still using the same gasket.

U2U sent.