Board logo

Rebore cost
Trollyjack - 23/10/11 at 03:17 PM

Hi
What the cost of a rebore these days

Got a 1300 crossflow

Also any body got any oversize pistons going spare

at the moment ist standard probably get away with 0.030" oversize but made need to go 0.060"

Paul Turner - 23/10/11 at 04:32 PM

Last rebore I had cost me £80 for the rebore and hone to match the pistons, no VAT.

fazerruss - 23/10/11 at 04:33 PM

Not sure about cost but the best place round here is lockside engineering in Castleford. They have been in the trade for donkeys years and really know their stuff.
It cost about £20 quid for a rebore on a single cylinder two stroke not long ago and about 25 for a four pot car cylinder head skim.

jacko - 23/10/11 at 06:22 PM

Not to far from you at Malton is
Precision Engineering Limited
Phone no
01653-600378
I have never used them but heard good things off them

They are down Derwent road Malton of York road

Trollyjack - 23/10/11 at 08:34 PM

Thanks guys
I will do some ringing round tomorrow

DixieTheKid - 23/10/11 at 09:20 PM

While on the topic, is there any reputable companies in the Southampton area? Thanks.

Neville Jones - 24/10/11 at 02:57 PM

quote:
Originally posted by DixieTheKid
While on the topic, is there any reputable companies in the Southampton area? Thanks.


http://saundersmotorworks.com/

Best in the south.

Cheers,
Nev.

DixieTheKid - 25/10/11 at 10:24 AM

quote:
Originally posted by Neville Jones
quote:
Originally posted by DixieTheKid
While on the topic, is there any reputable companies in the Southampton area? Thanks.


http://saundersmotorworks.com/

Best in the south.

Cheers,
Nev.


Thanks Bud. Ill give them a ring.