Many of you have configured your digidash instruments so can any one help please.

Digidash 2 lite: at the part in configuring my dash were im'e at calibration, the title is engine RPM calibration, there is a box were i must put a value in for the number of pulses per engine cycle from the ECU or coil pack.

My engine is a R1 2003 4 cylinder.

So is the number of pulses per engine cycle 4 as there are 4 cylinders.

I believe you will find the crank will have done 720 degrees for 4 pulses....but the cam only 360....