Hi all,

This is for a locost 7 setup. I have a 1.8 zetec (1998) black top I think. Will be going onto a 5 speed type 9 gearbox with a standard flywheel.

Any suggestions on clutch plate?

Cheers,

I went for a standard lucas clutch for a 1.8 zetec, thats with a type 9 box as well with a 1.8 zetec flywheel. The spigot bearing is from a sierra and the release bearing is from a capri, CCT133 off the top of my head (could be completely wrong though).

1.8 Mondeo clutch and plate, Capri ct133 on mine. The clutch was £20 off ebay....