Board logo

Type 9 Gear linkage.
stevem427 - 4/5/12 at 06:11 PM

Hi. Good evening every one. This is my first post on here,allthough i have been visiting for a while. Im wanting to move my gear stick back about 6". Can anyone point me in the right direction for one of them remote gear extension thingys.Cheers Steve.

Greenie - 4/5/12 at 06:22 PM

JJC or EBAY, you never someone on here may just have one knocking about ....... Mine came from EBAY when it broke

Ben_Copeland - 5/5/12 at 08:36 AM

me

eBay - The UK's Online Marketplace

stevem427 - 5/5/12 at 10:20 AM

quote:
Originally posted by Ben_Copeland
me

eBay - The UK's Online Marketplace
Hi Ben. Dont suppose your going to Stoneleigh on Sunday. Cheers Steve.

Ben_Copeland - 5/5/12 at 04:15 PM

Nope sorry chap

slingshot2000 - 5/5/12 at 04:41 PM

I have a good look on JJC's website but cannot see these anywhere? Anyone got a clue where they are. Woudl just like to look at some detail and then probably order one off Ben. Likie to buy/sell with fellow locosters if it helps with my build and theirs.

Kind regards
Jon

Ben_Copeland - 5/5/12 at 06:03 PM

have a look on Rally Design website... they are on there..

Infact i'll find you a link in a sec

Ben_Copeland - 5/5/12 at 06:04 PM

http://www.rallydesign.co.uk/product_info.php?products_id=13487&osCsid=rt0a1rsqlnpmkdq1fu83or2mm3

slingshot2000 - 5/5/12 at 06:31 PM

Thanks for that Ben, will have a look.

Regards
Jon

rusty nuts - 7/5/12 at 03:44 PM

Do a search on here for a post by David Jenkins, making your own has been covered loads of times , very effective and a lot cheaper than buying , also you can make it to clear the front UJ as people have had clearance problems. Mine cost a total of £0.92 including the quickshift.