Board logo

HELP!!
Hopley89 - 28/5/13 at 05:22 PM

I can't get no power the coil packs on my zx9r b3 model Iv got power and I'm turning the engine over but Iv put meter on it and its not giving me nothink ..
I'm not sure how many earths there should be on the loom ?
I'm abit stuck and I really could do with someone helping me out
Thanks dan

40inches - 28/5/13 at 05:29 PM

Are the side stand and clutch switches sorted out?

Hopley89 - 28/5/13 at 05:36 PM

Iv been told by some one on hear to cut the g/b wire comeing out the ecu to get away with the side stand and started cut out switch ..

Hopley89 - 28/5/13 at 05:54 PM

Iv now got power to the coils but it keeps blowing the main fuse ??

jossey - 28/5/13 at 06:59 PM

Earth strap?

40inches - 28/5/13 at 07:08 PM

quote:
Originally posted by Hopley89
Iv now got power to the coils but it keeps blowing the main fuse ??


How did you get power to the coils? Did you earth the wire that you cut?

Hopley89 - 28/5/13 at 07:38 PM

Iv earthed the g/b wire to the chassis .. But I found that hasn't sorted the cut out switches ...
I think the coils are dead as the wire to the coils is live but the pin into ht lead isn't giving a power output

What do you mean earth strap .. Is the earth the black/yellow wire ?

Dan