Board logo

Bike Throttle Body Photo Request
daveb666 - 30/7/13 at 08:15 AM

Currently in the middle of my GSX-R bike TB install build-up and I'm just after some photos of peoples installs as to the different ways the TBs themselves are mounted, fuel lines/fuel rails, filters and also throttle linkages.

Thanks

Andybarbet - 30/7/13 at 09:08 AM

Take a look in my archive, some pics of mine & others gsxr600 tbs.

stevebubs - 30/7/13 at 09:15 AM

and mine...

Jenko - 30/7/13 at 11:14 AM

If you look at my blog, the first few months were spent preping the engine...Part of this was the fitment of GSXR750 TB's to a Puma engine......In this case, they did not need spacing, but the manifold build may be of some use.

daveb666 - 30/7/13 at 11:15 AM

Thanks all - very helpful so far. - Welcome of any more though!

stevebubs - 30/7/13 at 01:15 PM

Useful Thread?

big-vee-twin - 30/7/13 at 04:57 PM

see opposite

big_wasa - 30/7/13 at 05:30 PM

Check out fast Dan's pics.

shiney shiney, you know it makes sense





[Edited on 30/7/13 by big_wasa]

big_wasa - 30/7/13 at 06:04 PM

eBay Item

daveb666 - 31/7/13 at 07:48 AM

lol can't believe every install literally has a different method of fitting!

FASTdan - 31/7/13 at 09:36 AM

quote:
Originally posted by daveb666
lol can't believe every install literally has a different method of fitting!


Thats because there's some many bloomin' variations of GSXR throttle bodies!! Makes it a nightmare to design around.

The above pic is my 'favorite' version (thanks for posting wasa), nice straight manifold due to respaced early GSXR1000 bodies, original fuel rail retained (albeit extended) etc.

If you need any parts from the above photo (or otherwise) drop me a message.

daveb666 - 31/7/13 at 10:02 AM

Really like your stuff Dan but I'm afraid I just can't justify the cost for the small gains I might get in the power increase.