Board logo

Mk1 Focus RS Injectors
James300481 - 31/8/16 at 11:25 AM

Kitspares sell a set of Mk1 Focus RS injectors for for £165, but they don't know the flow rate or impedance.

Has anyone got this info?

Part no. OID058A

Jamesc - 31/8/16 at 12:11 PM

440cc and High impedance

That's the info I remember from the RS Owners Club anywho.

James300481 - 31/8/16 at 12:15 PM

quote:
Originally posted by Jamesc
440cc and High impedance

That's the info I remember from the RS Owners Club anywho.


Is that at 3 bar?

Jamesc - 31/8/16 at 12:24 PM

quote:
Originally posted by James300481
quote:
Originally posted by Jamesc
440cc and High impedance

That's the info I remember from the RS Owners Club anywho.


Is that at 3 bar?


The fuel pressure reg is 2.7 bar on the FRS, not sure if that's any help?

big_wasa - 31/8/16 at 06:22 PM

Yep I've got some and was told they are 440cc and the reg is 270 kpa.

SteveRST - 31/8/16 at 10:44 PM

Consider these? I run them on my zetec turbo. New £130 delivered with fuel rail and 3 bar pressure regulator. Used on Astra VXR turbo but injector spacing seems same as zetec - I use the fuel rail on my zetec.

Genuine Vauxhall Astra VXR Turbo Z20LEH Fuel Rail and Injectors 55556798

Flow rate - 470ccm @ 3.0bar
High Impedance 14.2 Ohms I believe.

[Edited on 31/8/16 by SteveRST]

James300481 - 1/9/16 at 06:10 AM

I'm using a EFI fiesta CVH inlet that is modified, is the spacing still the same?