Hi

Any one used one between a pinto and type 9 box? Do you need the rs2000 clutch lever, or will a sierra one fit?

Adrian

As far as i know, they are the same, I have the bellhousing onto a x/flow using the orig sierra type 9 release arm, no probs found

Jason

I used the sierra lever but it need a small mod to be able to clear the bolt heads which fasten the bellhousing to the gearbox

Cheers

Mark

Thanks guys

The ones on ebay seem to sell cheaper without the clutch arm

Adrian

Guys,

Please can you supply the dimension between thw cable stop (on the b/housing), and the end of the clutch lever.

I seem to have approx 25mm mismatch on the cable length. Cable is new from W***f***d, and pedal/box s/h, but from same source.

Am using Capri 1.6 gbox with 1600 xflow, Capri clutch assy installed.

Should I revert to the xflow clutch assy?

Cheers