I have a set of R1 carbs which have a TPS fitted to them would i be able to use this with my megajolt system. Also does anyone know if the main jets in the carbs have to be changed/drilled to run on a 1600 zetec. If they have to be drilled does anyone know the diameter
Thanks.

You need to get it running then get to a rolling road - ideally with several sets of jets and some needles - a road that knows bike engines as well, a lot of them do not!

Bogg Bros are very helpful ,and setup a lot of these so can probably guess quite well, but they would recommend perfecting it on a rolling road, I dont know the size of R1 main jets but my Suzuki 38mm carbs where 115 , they are now drilled to 165 I think, wouldnt run well up the top end until they where over 140. I have a lamda readout in my car so I've got an idea whatss going on( made with 10 led's and a few components)

[Edited on 13/10/05 by Surrey Dave]