Because I am a lazy 'person' does anyone know the size of the bolts I need to bolt a type 9 to its bell housing? Whilst I am here also what size bolts to bolt the bell housing to a 2.0 Zetec. It's cold outside and dark so I though easier to ask the question....

[Edited on 25/10/05 by Dave Bailey]

M12 x 40ish x 1.25 (metric medium fine) IIRC, sombody come on and back me up!

40ish will be plenty long enough, won't hurt if they are a touch too long, they go into open space anyway.

no idea on the engine ones but I'd bet they are std M12 (M12 x 1.5)

[Edited on 25/10/05 by NS Dev]

Thanks!

and I'm still as warm as toast!

Bellhousing to engine are M10x40x1.5. Took my engine out today so I've just seen them. Bellhousing to box are as NSDev sez.

ahh shucks, think I am wrong on the bellhousing to box ones then!

They are M12 x 40ish by 1.5, not 1.25 then!

They are one step finer than std m12, not the finest M12. For some reason I thought std M12 was 1.5, not 1.75!

sorry, too much beer!

Does anyone know the same thing for 1.3 Crossflow to bellhousing bolts?